Browse our Products:

CCT - Additional Options

Chamber:

Salt Fog Start Up Package (Part # 500110)

Includes two collector funnels with graduated cylinders, one 50lb bag of salt, and one specific gravity hydrometer. All items comply with ASTM B117. Also available as individual items.

Salt Fog Start Up Package (Part # 500111)

Same as 500110 except that it includes four collector funnels with graduated cylinders instead of two. For larger corrosion test chambers that have more than one fogging tower.

External Condensate Collection Package (Part # 500120)

Provides external sampling of fog condensate collection without opening chamber or interrupting test. Complete with two condensation collector assemblies mounted externally on stand and piped to collector funnels mounted in exposure zone

External Condensate Collection Package (Part # 500140)

Same as 500140 except that it includes four condensation collector assemblies mounted externally on stand and piped to collector funnels mounted in exposure zone. For larger corrosion test chambers that have more than one fogging tower.

Ontario Hydro Wiring Package (Canada Only)

Wiring to conform to Ontario Hydro Wiring Standards.

Exhaust:

Re-circulating Exhaust Condenser System (Part # 503360)

System condenses and collects chamber exhaust into a separate 24 gallon reservoir mounted on Level-Matic® stand. System is completely self-contained, no outside vent required.

Salt Solution Convenience:

Auxiliary Salt Solution Mixing and Storage Tank* (Part # 503600)

Separate polypropylene tank with re-circulating/mixing pump and filtration system for homogeneous/uniform solution makeup. Pump system also permits transfer of solution to test apparatus. Includes aeration/ air sparger system and controls for unattended mixing of salt solution. Mounted on a portable stand with casters. Available in 55-gallon capacity. Very convenient for multiple chamber installations.

Communication:

Modem (Part # 862880)

External access, pre configured for convenient, on-line factory service such as test maintenance, program updates, and troubleshooting.

Data Acquisition Software (Part # 862960)

The HMI program pack facilitates communication between the corrosion test chamber and a PC using a standard COM port on the PC. Trends, recipes and alarm lists are simple to transfer to the computer for further work (graphing, spreadsheets, etc.)

Network Communication Card (Part # 862961)

Works in conjunction with part# 862960 software, adding the capability to monitor chamber functions and change test settings using Internet Explorer. This is done over a standard Ethernet LAN connection.

Test Packages:

Electrolyte Solution Spray / Rainfall Test Manifold (Part # 504840)

Assembly includes a water regulator and distribution manifold with multiple nozzles to provide spray over the entire exposure zone. Included with all new CCT test chambers.